For each item on board, moment = mass × arm. Add up the masses and the moments; CG = total moment ÷ total mass. Then check the total mass against the limits and the CG against the envelope in the POH, for take-off and for landing.
The words
- Arm: how far an item is from the datum, a reference point the POH chooses (in metres, inches or millimetres).
- Moment: mass × arm, how much an item turns the aircraft about the datum.
- Basic empty mass: the aircraft's own mass and arm, from its own mass and balance report (each aircraft is different, even of the same type).
- Envelope: the area of mass and CG the aircraft is allowed to fly in, drawn in the POH.
A worked example
Made-up figures to show the method, not from any POH:
| Item | Mass (kg) | Arm (m) | Moment (kg m) |
|---|---|---|---|
| Basic empty mass | 700 | 2.20 | 1,540.0 |
| Front seats | 160 | 2.05 | 328.0 |
| Baggage | 20 | 3.60 | 72.0 |
| Fuel, 100 L (× 0.72 kg/L) | 72 | 2.40 | 172.8 |
| Take-off | 952 | 2.219 | 2,112.8 |
| Fuel burnt, 40 L | −28.8 | 2.40 | −69.1 |
| Landing | 923.2 | 2.214 | 2,043.7 |
The take-off CG is 2,112.8 ÷ 952 = 2.219 m behind the datum. Burning fuel from a tank behind the CG moves it forward a little, so the landing CG is checked too. Many forms also work out the zero fuel mass, the aircraft with everything but fuel.
Checking it
- Mass: at or below the maximum take-off and landing masses (and the maximum ramp and zero fuel masses, where the POH has them).
- CG: plot each mass and CG on the POH's envelope; both points must be inside it (and in the utility category's, for manoeuvres that need it).
- Seats and baggage: each has its own limit too.
The figures for common trainers, from their handbooks: Cessna 152, Cessna 172S, PA-28-161 Warrior II, PA-28-181 Archer II, DA 40 NG, DA 42 NG.
The method, not your aircraft's figures: always use your aircraft's own POH and mass and balance report. The pilot in command is responsible for the loading.