🛬 RUNWAYS

Declared distances explained: TORA, TODA, ASDA and LDA

A runway is 800 m long, but the AIP lists four different distances for it, and none of them may be 800 m. Here's what each one means and which to compare with the figures from your POH.

The short answer

TORA is the runway available for the take-off run, TODA adds any clearway beyond it, ASDA adds any stopway, and LDA is the length available for landing. Compare your take-off ground roll with the TORA, your take-off distance (to 50 ft) with the TODA, and your landing distance with the LDA.

The four distances

DistanceWhat it isCompare with
TORA
take-off run available
The length of runway declared available for the ground run of an aeroplane taking offTake-off ground roll
TODA
take-off distance available
The TORA plus any clearway: an area beyond the runway's end, clear of obstacles, over which the aeroplane can climbTake-off distance to 50 ft
ASDA
accelerate-stop distance available
The TORA plus any stopway: an area beyond the runway's end where an aeroplane can stop after an abandoned take-offAccelerate-stop distance, where the POH gives one
LDA
landing distance available
The length of runway declared available for the landing runLanding distance from 50 ft

Why they differ from the runway's length

Where to find them

In the aerodrome's AIP entry (in the UK and Europe, section AD 2.13). Small private strips often don't publish declared distances, so you only have the runway's length and its owner's information.

Declared distances in PilotMetricsFree: every runway end's TORA, TODA, ASDA and LDA where openAIP lists them, on the Aerodromes pages and Runways & Wind; and the Performance card puts your aircraft's take-off and landing distances, read from its POH charts for the day's conditions, next to them.
Open Performance

The day's conditions change your distances a lot: see density altitude.

For understanding, not planning: always use the current AIP for the runway, and your aircraft's POH and any safety factors your school uses for the distances.

QUESTIONS

Common questions

What is the difference between TORA and TODA? ▼
TORA is the runway available for the take-off ground run; TODA adds any clearway beyond its end, an obstacle-free area over which the aeroplane can climb to 50 ft.
Why is the LDA shorter than the runway? ▼
Usually because of a displaced threshold, which moves the start of the landing distance along the runway, often to keep clear of obstacles on the approach.
KEEP READING

More on flying and pre-flight

Your distances next to the runway's.

Free. Import your logbook in a few minutes, or try the demo first.

Start Tracking - Free