- Any airport by its code or name: runways, frequencies, elevation, local time, magnetic variation and nearby airfields.
- The latest METAR and the TAF, each group explained, with the TAF's periods on a timeline in local time.
- Headwind and crosswind on every runway end, from the METAR, a TAF period or a wind you enter.
- The airport's NOTAMs, and the area NOTAMs near it, as issued, updated every few minutes, and on a map.
- Airspace on a map, with navaids, reporting points and obstacles: tap anywhere for each airspace's class, limits and what it requires, and see every airspace along a route at your altitude.
- A page for every aerodrome: runways, declared distances, surfaces, lighting, frequencies, hours and remarks, and the official AIP to check.
- Pressure, density and true altitude, sunrise to civil twilight, a flight computer, cloud base estimates and unit conversions.
- Mass & balance for your aircraft on its CG envelope, and take-off and landing distances read from the POH's own charts.
- A nav log (PLOG) for a cross-country: the wind correction angle, ground speed and true, magnetic and compass headings on each leg, distances, times and fuel, ETAs at each checkpoint as you fly, and a PLOG to print.
Pre-Flight is a folder of six pages in the sidebar: Airport & Weather (/preflight), Airspace (/airspace), Aerodromes (/aerodromes), Mass & Balance (/mass-balance), with the Performance card, Nav Log (/nav-log) and Briefing (/preflight-brief, Lite and Pro), which puts them together into one document for each flight. They're for your awareness and practice, not for flight planning: always check the official briefing and the aerodrome's own information. It shows figures and what the reports and NOTAMs say, never whether to fly.
Finding an airport Free
Type an ICAO code (EGTK) or part of a name (Oxford). The page opens on your home airfield (where most of your flights start) and keeps your recent airports as buttons under the search. Its address (/preflight?icao=EGTK) opens the same airport, so you can bookmark or share it.
๐ซ Airport Free
- Elevation, local time (with UTC) and magnetic variation, worked out with NOAA's World Magnetic Model.
- Frequencies (ATIS, tower, ground, approach and so on) and a map.
- Nearby airports with their distance and direction: tap one to open it.
Airport, runway and frequency data comes from OurAirports, a public list that pilots keep up to date. It can be incomplete or out of date, so the AIP comes first.
๐บ๏ธ Airspace Free
On its own page, Airspace (under Pre-Flight): the airspace on a map, for learning it and for seeing what a route goes through. It opens where you last left it, or on your home airfield; search an airport to go there.
- Airspace Map: controlled airspace (CTRs, TMAs and CTAs, coloured by class), prohibited, restricted and danger areas, ATZs, RMZs and TMZs, and gliding and sport areas, each a layer you switch on and off (FIRs and airways too, off at first). Choose how high to show: airspace at every height, or only what starts below 5,000 ft, 10,000 ft or FL195. NOTAMs switches the NOTAMs on over it, drawn as on Airport & Weather: tap one to read it.
- Points on the map: navaids (hexagons: their identifier, type, frequency, channel, range and variation), reporting points (triangles, filled when compulsory, with the airfields they're for) and obstacles (dots, bigger the taller they are: their type, height above the ground and about how high their top is), with thermal hotspots, hang gliding and paragliding sites (take-off or landing, suitable wind directions, access) and RC model airfields (the height models fly up to, hours) as layers to switch on. Each shows once you've zoomed in far enough; tap one for what openAIP lists. Obstacles are openAIP's from OpenStreetMap, and not every obstacle is listed.
- Airspace Here: tap the map for every airspace above that point, lowest first, drawn as a stack by height. Each shows its type, class and vertical limits as published (SFC, feet above the ground or sea level, or a flight level), its frequencies and transponder codes, and when it's active (by NOTAM, on request, its hours). Open one for what its class and type require (a clearance, radio, a transponder, speed limits, VMC minima), from the rules of the country it's in, each with its reference: 14 CFR and the AIM in the United States, SERA in EASA countries, and the UK's SERA, Rules of the Air and AIP in the UK. Elsewhere it shows SERA's descriptions of the classes (which follow ICAO's), and the country's own AIP gives how it uses them.
- Route Through Airspace: add airfields (EGTK EGBJ) or positions (51.75,-1.58), or click points on the map (a navaid or reporting point is added by its name), and set your altitude. The route is drawn on the map, and it lists every airspace it passes through, where along the route (nm) and whether your altitude is inside its limits, below its base or above its top, with a vertical profile of the whole route. Legs are straight lines; limits above the ground or flight levels are compared as feet, so they're only roughly right.
The airspace and the points are openAIP's, at every height, kept up to date daily. It can be incomplete or out of date, and countries publish differences from the rules shown, so it's a study aid: plan with the current chart and AIP, and get ATC's clearance where one is needed. It shows the airspace and the rules, never whether you may go in. Your layers, last view, route and altitude stay on your device.
What each class means: airspace classes explained, A to G.
๐ฌ Aerodromes Free
On its own page, Aerodromes (under Pre-Flight): a page for each aerodrome openAIP lists, from international airports to farm strips and glider sites (not heliports), at its own address, such as /aerodromes/EGTK. Search by ICAO or IATA code or by name (answers come as you type), or browse a country's list. Anyone can open it, with or without an account.
- Aerodrome: its ICAO and IATA codes, elevation (feet and metres), type, VFR or IFR, position, and whether openAIP marks it PPR, private, used for parachuting or winch launching only. Links go to the country's official AIP, its weather and NOTAMs on Airport & Weather, the airspace around it, and its own website and openAIP's entry.
- Map: where it is, and the nearest aerodromes within about 20 nm, each a link to its own page.
- Runways: each runway direction with its true heading, length and width (metres and feet), surface, condition and PCN, declared distances (TORA, TODA, ASDA, LDA), lighting, PAPIs and instrument aids, and anything that limits it (take-off or landing only, or only some aircraft types). Circuit shows the side openAIP gives for a runway's circuit where it gives one, which for most runways it doesn't: the AIP has the circuit.
- Frequencies, Operating Hours (by day, or openAIP's notes on them), Services (fuel, glider launching, handling, facilities) and Remarks, where openAIP lists them.
- Sources & Data Currency: the official source for the aerodrome's country, the date openAIP last changed the aerodrome, and when our copy was last checked.
The data is openAIP's, a community database, kept up to date daily, with runway lighting and links from OurAirports where openAIP has none. It can be incomplete or out of date, so it's for study and planning: the AIP and the aerodrome are the source, and check the NOTAMs. Nothing on the page is saved.
โ๏ธ Mass & Balance Free
On its own page, Mass & Balance (under Pre-Flight). Your aircraft's mass and centre of gravity (CG) for the flight, worked out the way the POH's loading form does it, and drawn on its CG envelope.
- Set an aircraft up once in Settings > Your Lists (the โ๏ธ button next to it): start from its type's POH figures (the stations' arms, fuel, mass limits and envelope, with the document and revision they come from) or enter your own, then add its own empty mass and arm from its mass and balance report. You tick that you've checked the figures against the aircraft's own documents before they're saved. You can keep the report and POH pages with them, and every change is a new version you can go back to.
- Without an account, pick a type and type an empty mass and arm: nothing is saved. The same goes for someone's shared profile: mass and balance isn't part of it, so neither their aircraft and masses nor yours are shown.
- Who's on board: choose yourself, an instructor or someone else for each seat. Your mass and your instructors' (saved in Your Lists) are suggested, but only counted once you confirm them for this flight (or type a figure). If your instructor or your flight school has set an instructor's mass, the newest is suggested, marked with who set it and when.
- Baggage, fuel (in volume or mass) and the planned burn, with the POH's taxi allowance where it has one.
- The zero fuel, ramp, take-off and landing mass, moment and CG, each checked against the mass limits and the envelope (normal or utility category). Anything missing, over a limit or outside the envelope is listed.
School suggestions: when pilots at your flight school have set up the same registration, the editor shows the figures most of them use (when at least two pilots saved the same), how many pilots and when, marked unverified (never who). They only become yours if you use them, check them and save them. Instructors' masses work the same way in Your Lists. Your own mass is never shared.
Type figures so far: Piper PA-28-140 Cherokee Cruiser, PA-28-151 Cherokee Warrior, PA-28-161 Warrior II and PA-28-181 Cherokee Archer II; Diamond DA 40 D, DA 40 NG, DA 42 (TDI), DA 42 NG and DA 42-VI; Cessna 152 (1978) and 172S Skyhawk SP. Different serial numbers and POH revisions can differ, so check every figure against your aircraft's own POH and mass and balance report: the pilot in command is responsible for the loading.
New to the sums? Read how to do a weight and balance calculation. Each type's figures: Cessna 152, Cessna 172S, PA-28-161 Warrior II, PA-28-181 Archer II, DA 40 NG, DA 42 NG.
๐ Performance Free
Take-off and landing distances read from the POH's own charts or tables, for the airfield's pressure altitude and temperature (from the last airport you opened on Airport & Weather, in the past three hours, on this device), the mass from Mass & Balance and the steady wind along the runway you pick (from Runways & Wind). You can change any of them.
- A chart is drawn as the POH prints it, with your path through it, so you can compare it with the printed chart. A table is shown as printed, with the figures used marked; between its rows and columns the figure is in a straight line between them.
- Charts (take-off and landing, distance over 50 ft and ground roll): the PA-28-161 Warrior II and PA-28-181 Cherokee Archer II (take-off with flaps 0ยฐ and 25ยฐ, and landing), the PA-28-140 (take-off with flaps 0ยฐ, and landing), the PA-28-151 (take-off with flaps 0ยฐ only), the DA 40 D and the DA 42 (TDI), whose AFM draws each chart twice, up to and above 1,700 kg: the one for your mass is used. Their lines were digitised from the POH's pages and each reproduces the POH's own worked example or, where the chart has none, the POH's own sea-level figures (the PA-28-140's landing distance over 50 ft has no printed figure: the landing ground roll, read from the same page, checks it).
- Tables (take-off and landing, distance over 50 ft and ground roll): the DA 40 NG, DA 42 NG and DA 42-VI, and the Cessna 152 and 172S (short field). Where the POH prints a table for one weight only (the Cessna 152's, and the 172S's landing), a lighter mass takes that table's figures (as the Cessna 152's own sample problem does), which can only lengthen the answer, and the card says so.
- The PA-28-140's charts are read off density altitude, which the POH's altitude conversion chart gives from the temperature and pressure altitude. They're for zero wind (the POH gives no wind correction), so with a wind entered there's no answer. Below the conversion chart's sea-level line its bottom edge is used, the highest density altitude the conditions can give, and the card says so; below the chart's lightest weight line, that line's figure is used.
- The runway's own figures are under the answer: for a take-off its TORA, TODA and ASDA, for a landing its LDA (openAIP's declared distances, in the answer's unit and the other), or, where openAIP has none, its length from OurAirports. They're side by side for you to compare: check them in the AIP.
- Off the chart's lines or the table's rows and columns there's no answer (nothing is extrapolated), and the card says which input is off it.
- Corrections are only the POH's own. Where its notes give them (a table's headwind and tailwind, a grass runway, a slope), you pick the surface or enter the slope, and the card lists each correction with its share of the figure. Anything the POH doesn't give a correction for isn't in the figure, and the card says so.
๐งญ Nav Log Free
On its own page, Nav Log (under Pre-Flight): the navigation log (PLOG) for a cross-country, the sums you'd do with a flight computer and a protractor done leg by leg, for when you start the navigation part of your training.
- Route: add the departure, each turning point and checkpoint, and the destination, in order: airfields by their code (EGTK EGBE), positions (52.1,-1.3), or taps on the map, where a navaid or reporting point (once you've zoomed in) is added by its name, with its frequency. A checkpoint can be named first and placed on the map later (๐), or kept without a position, with its leg's track and distance typed from your chart. Drag a point on the map to move it, add a checkpoint before any point (๏ผ), move points up and down, or reverse the route. See the airspace along it opens the route on the Airspace page, and the Airspace page's route opens here with Make a nav log from it.
- Your Nav Logs: every nav log you've saved, the latest flight first; open one to fly it again or change it. Without an account, the one you're making is kept on this device.
- Aircraft, Wind & Fuel: the date, aircraft and type, TAS, altitude and the wind (degrees true and knots) every leg starts from, an alternate airfield, and the fuel: its unit (litres, US or imperial gallons, kg or lb), the burn per hour, what's on board, and the fuel plan's allowances (taxi and run-up, contingency as a share of the trip, the final reserve in minutes, and any extra). Put in the minimums and reserves your rules and your school's orders give: nothing is assumed for you. The aircraft's compass deviation card (every 30ยฐ) is here too; without one the compass heading is the magnetic heading.
- Navigation Log: a row for each leg (and the alternate), with its altitude, MSA, TAS, wind, true track and distance. The track and distance are measured between the leg's two points (a great circle, the track at the leg's midpoint, as with a protractor at the mid-meridian), and the variation is the World Magnetic Model's at the leg's midpoint on the flight's date; type over any of them with your own, as you can the leg's wind (a forecast wind at its altitude), TAS or altitude. Each leg shows its wind correction angle, true, magnetic and compass headings, ground speed, time and fuel, with the totals above. As on paper, it's whole degrees and whole minutes: the WCA added to the true track, variation west added and east taken off, then the deviation.
- Fuel Plan: taxi, trip, contingency, the alternate, the final reserve and extra, what they add up to, and against the fuel on board how much more or less there is and the endurance after taxi.
- Checkpoints & ETAs: write in the time off (ATD) and each checkpoint's ETA follows from the legs' times. In flight, write in each checkpoint's time as you pass it (or press Now): the difference from the plan shows, the ETAs after it are revised from it, and between two times you've written in the ground speed you actually made. Times are in UTC or local time, as you choose, with the fuel the plan expects you to have left at each point.
- Diversion: press Plan a diversion and choose where it starts: some minutes into one of the legs (the plan works out where you'd be then at the leg's ground speed, the time from your time off or the last checkpoint's time, and the fuel it expects on board), or a position of its own, tapped on the map or your device's own (My position, which stays on your device unless you save the log). Then where to divert to: an airfield by its code, a position, a tap on the map, one of the nearest airfields to the diversion point (with their distance and true bearing) or an airfield on your log. It's worked out as one more leg, from the plan's TAS, wind and deviation card unless you type the diversion's own: the heading to fly (magnetic, with the compass and true headings and the WCA), the distance, ground speed and time, the ETA from the time there, and the fuel at arrival (from the fuel on board there, typed or the plan's) against the plan's final reserve. It's drawn on the map as a dashed line, saved with the log, printed under the PLOG, and Start a nav log from it makes it a nav log of its own. You can use it to practise diversions too: pick a point, work the diversion out yourself, then compare.
- Print PLOG: the log on an A5 page, upright, to fit a kneeboard: each leg's altitude, wind, track, the true, magnetic and compass headings (with the WCA, variation and deviation in small type under them), ground speed, distance, time, ETA and the fuel you should have left, a column to write each ATA in, the checkpoints' frequencies and notes, the fuel plan and a box for the ATIS and clearances. A long route runs on to a second page. Choose A5 in your printer's settings (or print it on A4 and fold or cut it).
- Export GPX and Export Garmin FPL Lite: under the route, download it as a file for a flight planning app or GPS that reads them (ForeFlight imports the GPX). Only the route goes in the file, not the winds, fuel, notes, alternate or diversion; a point without a position is left out and the page says which. In the FPL, most airfields with a four-letter code are airports, and other points are user waypoints by their position. Check the route once it's loaded.
It's a planning and study aid: check every figure against the current chart, your aircraft's documents and the forecast. It works out the figures, never whether to fly. Your saved nav logs are only ever yours: they're not on your shared profile or shown to your instructor or school. The demo's two nav logs are samples you can change on the page (saving is off).
๐ Briefing Lite
On its own page, Briefing (under Pre-Flight): your pre-flight brief for one flight, saved to your account so you can open it again on any device, and downloaded as a PDF to print or take with you.
- Your Briefs: every brief you've saved, the flights still to come first. A brief you haven't saved yet is kept on this device until you do.
- Flight: pick one of your FlightLogger bookings (with FlightLogger sync; the Coming up card and the Dashboard have a Brief link for each) or type the date, time, aircraft, airfields and instructor. The lesson is suggested from your syllabus, the first one none of your flights has flown yet, as bookings don't say which lesson they're for.
- Weather: the latest METAR and TAF for the departure and the destination (from the nearest airfield that reports, as on Airport & Weather), with the TAF's periods from an hour before your flight to three hours after it. The brief keeps the reports as they were when fetched, with the time, so press Refresh before you fly.
- Frequencies: the departure's and the destination's (from OurAirports, as on Airport & Weather) and, between them, every airspace the straight line from one to the other passes through that starts below FL195, in the order it meets them, with its class, vertical limits, how far along it is, and its frequencies and transponder codes (openAIP's). It's at any height: your route and level decide which you're in. Kept with the brief as fetched.
- NOTAMs: the departure's and the destination's, and the area NOTAMs near them (as on Airport & Weather), then en route: those whose area comes within 10 nm of the straight line between the two airfields, below FL100 (your planned route may differ), those in effect from an hour before your flight to three hours after it. A map shows them, and every other NOTAM in its view, loaded as you move it: each NOTAM's area drawn from the positions in its text (polygons, circles and points; arcs and borders as straight lines), or, when its text gives none, its Q line circle, dashed, as it's only roughly where the NOTAM is. Colours are the NOTAM's subject (airspace restrictions, warnings, airspace organisation, the rest); tap the map for every NOTAM there, one at a time. Heights aren't on the map: read each NOTAM. The brief keeps them as they were when fetched, with the time, so refresh them before you fly too.
- Mass & Balance and Performance: the same two cards as the Mass & Balance page, on the aircraft of the flight if you've set it up, with the departure's pressure altitude, temperature and runways from the brief's weather. Masses are still only counted once you confirm them.
- Aircraft & Fuel, Threats & Errors (threat and error management: each threat with how you'll manage it, and errors with how you'll catch them) and the Lesson Brief (aims, exercises, what to remember, with the remarks from your last flight and from the last time you flew the same lesson): what you write. Nothing is filled in for you.
- Attachments: once the brief is saved, attach the nav log, a weather printout or your briefing notes (photos, images or PDFs). Images go in the brief's PDF, each on its own page, and PDFs are listed there by name. Once you log the flight (the same date and aircraft), they're on it too: see Flight Attachments.
- Document: save the brief, download the PDF of everything on the page, or delete it.
The brief isn't an official briefing: check the official briefing too, NOTAMs included, as not every NOTAM may be in the brief. Your briefs are only ever yours: they're not on your shared profile or shown to your instructor or school.
๐ค๏ธ Current Weather Free
The latest METAR, with its flight category (VFR, MVFR, IFR or LIFR), tiles for the wind, visibility, cloud, temperature, QNH and density altitude, and then the report itself, every group explained: hover or tap a group to find its meaning. It reads European and US reports (statute miles, inHg and the common US remarks). Earlier reports from the last few hours are underneath.
Many airfields don't publish a METAR. Then the nearest airfield that does (within about 27 nm) is used, and the card says which and how far away.
For the groups in order, read how to read a METAR.
๐งญ Runways & Wind Free
Every open runway with its length, surface and lighting, and for each end its headwind or tailwind and its crosswind (and from which side), in the steady wind and in the gusts, and its declared distances (TORA, TODA, ASDA, LDA) where openAIP lists them. The end with the most headwind is marked "most into wind", and a diagram shows the runways with the wind arrow.
- METAR wind or My own wind: enter the wind from your airfield's own weather station, the ATIS or the tower. You only enter the wind: the runways are already there, and every end is worked out at once.
- Magnetic or true: METARs and TAFs give true wind, the ATIS, towers and most airfield stations magnetic. Pick which yours is; runway headings are compared as magnetic, using the variation.
- Change a heading if it's wrong (tap it and type the published one), or add a runway (for example 08/26) for an airfield with no runway data. Your changes, and the last wind you entered, are kept on your device for next time.
- In the TAF, Use this wind shows a forecast period's wind on the runways.
The working, and the clock rule for doing it in your head: how to calculate the crosswind component.
๐ Forecast (TAF) Free
The TAF's periods (the main forecast, becoming, temporarily and probability groups) on a timeline in the airport's local time and UTC, with the one in force now marked, each in words with its flight category. Below, the TAF group by group, explained like the METAR.
๐ข NOTAMs Free
The airport's NOTAMs that haven't ended yet, as issued: each with its number, its subject (from its Q code: lighting, movement area, airspace restrictions and so on), its text, its times in UTC (marked when the end is estimated, or permanent), its schedule and its upper and lower limits. Those that start later are marked with when they start.
Underneath, folded away when there are many, the area NOTAMs: other NOTAMs whose area comes within 10 nm of the airport and starts below FL100: the area the positions in their text give, or otherwise the circle in their Q line, with how far away it is. NOTAMs for a whole FIR without positions in their text, and those with neither (some route and US domestic airspace NOTAMs), aren't listed, so not every NOTAM is here: always check the official briefing.
Above the list, a map shows them, and every other NOTAM in its view at any height, loaded as you move it: each NOTAM's area drawn from the positions in its text (polygons, circles and points; arcs and borders as straight lines), or, when its text gives none, its Q line circle, dashed, as it's only roughly where the NOTAM is. Colours are the NOTAM's subject (airspace restrictions, warnings, airspace organisation, the rest); tap the map for every NOTAM there, one at a time. Heights aren't on the map: read each NOTAM.
PilotMetrics keeps its own copy of every NOTAM, updated every few minutes; the card says when it was last updated, and warns when that was more than half an hour ago.
The parts of a NOTAM and its abbreviations: how to read a NOTAM.
๐ Altitude & Density Free
Filled in from the airport and its METAR, and you can change any figure (QNH in hPa or inHg):
- At the airfield: pressure altitude, the ISA temperature and deviation, density altitude (with the 120 ft per ยฐC rule of thumb next to it) and the QFE.
- In flight: for an indicated altitude on the QNH, the pressure altitude and flight level, the height above the airfield, the true altitude corrected for temperature, and the density altitude there.
Worked through by hand: density altitude explained.
๐ Sun & Daylight Free
For any date: the start of morning civil twilight, sunrise, solar noon, sunset and the end of evening civil twilight, in local time and UTC, with the day's length. Night, for logging and for the rules on carrying passengers, is between the end of evening civil twilight and the start of morning civil twilight (FCL.010, 14 CFR 1.1).
๐งฎ Flight Computer Free
- TAS from IAS, pressure altitude and temperature.
- Wind: the heading to fly (true and magnetic), wind correction angle and ground speed for a track.
- Time & distance: any one of time, distance and ground speed from the other two.
- Fuel: trip fuel, the reserve minutes you enter and taxi, in litres or US gallons, and the weight for Avgas, Mogas or Jet A-1.
๐ Cloud Base & Conversions Free
An estimate of the cumulus cloud base from the temperature and dew point spread, a freezing level estimate and the relative humidity, plus conversions between hPa and inHg, ยฐC and ยฐF, feet and metres, knots, km/h and mph, nautical and statute miles, kilograms and pounds, litres and gallons, and fuel volume and weight.
Privacy
Only the airport's code is sent to look its weather up. Its NOTAMs and the airspace come from PilotMetrics' own copies, so looking them up sends nothing anywhere. Recent airports, runway changes, winds and the loading you type stay on your device. Your aircraft's figures, their documents and the masses you save in Your Lists are kept on your account, seen only by you (apart from the anonymous school suggestions above), and never on your share link. The nav logs you save are kept on your account the same way, seen only by you; looking up an airfield for one sends only its code, and finding the airfields nearest a diversion point sends only that position.